Images are representations only.
MiniBLOCK Test Port with Chemraz
Price
Request a Quote
Stock
Out of Stock
Product Series Specifications
Specifications
Electrical
- Solenoid: ASCO, explosion-proof, 2-Way, direct acting, normally closed, 120 Vac/60 Hz. (Standard), other voltages available as an option. Current 17.1 watt (Standard)
- Sensor: Hall-Effect type, non-intrusive, 3-wire, 5-30 Vdc
Mechanical
- Elastomers: Chemraz dynamic seals, Teflon Viton static seals (Standard), other elastomers available as an option
- Field Mounting: (2) mounting holes provide for the mounting of the device to backplane or unistrut utilizing 5/16-inch hex socket cap screw
- Configuration: Multi-PAC configurations include 1-PAC through 6-PAC, each PAC pre-wired and pre mounted
- Meter Access: Meter access via recessed socket cap screws located under sensor
- Meter Gears: Oval gear design, 300 Series Stainless Steel (Standard) with Tungsten bearing
- Needle Valves: 316 Stainless Steel with Teflon packing, high pressure rated
- Calibration: Swagelok quick-connect fitting with dust cap, 316 Stainless Steel, mates with PN 77-CTK-50 elastomer
- Strainer: Stainless Steel filter screen, basket type, 230 micron (60 mesh) or 440 micron available
- Check Valve: Teflon check with Vitron or Chemraz O-ring, 1 psig cracking check
- Dimensions: 6.5" L x 4" H x 1.5" D (165.1 mm x 101.6 mm x 38.1 mm)
- Connections: 3/8" FNPT Inlet & 3/8" MNPT Outlet
Optional Accessories
- Calibration Kit: PN 77-CTK-50 (Standard)
- Thermal Relief Kit: PN 77-TRK-10 (Device recommended for all dye applications)
