Images are representations only.
Description
The OPTISWITCH 6600 C is a level switch for level detection and dry-run protection for liquids and solids. Through its small and optimal sensor shape, the device is easy to clean and the risk of clogging of sticky products is minimised.
The device measures liquids such as water and beer and even viscous and sticky products such as honey or toothpaste. Solids (sugar or flour) can be also measured.
The measurement is precise and not affected by the mounting position. Coating of the sensor or condensate are not detected.
The OPTISWITCH 6600 C is resistant to CIP and SIP agents. Hygienic installation is possible with the comprehensive range of accessories.
Features- Process temperature -40° to 115° C (-40° to 239° F)
- Insensitive to build up or foam
- Measures alternating media
- LED switching point indication
- Hygienic switch entirely made of stainless steel
- Excellent for media separation
- No blockage of the pipeline
Inventory
Displaying prices & availability for Ohio, United States in USD. Change location.
Models matching criteria: 1
Out of Stock
Configure
Specifications
Specifications
Brand
Adjustment Type
- Measure: εr > 2, Damping: 0.1 second
Ambient Temperature Range
- -40° to 85° C (-40° to 185° F)
Applications
- Cosmetics
- Dry-Run Protection of Cream
- Food & Beverage
- Level Detection of Mustard & Ketchup
- Media Separation of Liquids & Solids
- Pharmaceutical
Approvals & Certifications
- ATEX II 3 G Ex NA II T5, ATEX II 1 G Ex ia IIC T5, ATEX II 1D Ex IIIC T100° Da
- CE
- EHEDG
- Electromagnetic Compatibility (EMC): EN 61326-1 (2006)
- FDA
Approvals & Certifications
- 3A for Hygienic G 1/2”, FDA Conform Materials
- Vibration Resistance: IEC 68-2-6, GL Test 2 (Standard & DN 38 Connection)
BSP Connection
- G 1” Male
- Hygienic, Standard, Reverse-Threaded: G 1/2”
Cable Entry
- M12 Plug (4-Pole Lumberg)
Cable Length
- 16.40 feet (5 metres)
Consumption
- 1.1 W
Current
- Off Leak Current: ± 100 μA, Max.
Damping Adjustment
- 0 to 10 seconds
Electrical Connectors
- Allen Screw Blanking Plug
- M12 4-Pin Connector Plug
- Non-Shielded Cable with Flying Leads
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure Finish
- Inside Electro-Polishing
Enclosure, Body Material
- Sensor: 316L Stainless Steel, 1.4401
Environmental Protection
- IP66
- IP67
- NEMA 4X
Hysteresis
- ± 0.04” (± 1 mm)
Indication
- Switching Point is Signalled by a Blue LED Indication
Materials of Construction
- Plug M12: Nickel-Plated Brass
Maximum System Pressure
- psi: 1,450 (kPa: 10,000, bar: 100)
Mounting
- Reverse-Threaded G 1/2” Connection Can be Mounted in a Pipe
Mounting Position
- Any Orientation
Output
- Maximum
Output Format
- NPN
- PNP
Pipe Connection
- 1” Pipe (DN 25)
- 1-1/2” Pipe (DN 40)
- 1-1/4” Pipe (DN 32)
- 2” Pipe (DN 50)
Power Supply
- 12-30 Vdc / 30 mA - Max.
Principle of Operation
- Electromagnetic Wave (100 to 180 MHz)
Process Connection Material
- 316L Stainless Steel, 1.4401
Process Temperature
- 130° C (266° F) < 1-Hour, Tamb < 40° C (104° F)
- -40° to 115° C (-40° to 239° F)
Resolution
- ± 0.04” (± 1 mm)
Response Time
- Reaction Time: 0.2 second
Seat / Seal Material
- Seal: EPDM
Sensor, Probe Length
- Sensor Length: 0.7” (18 mm)
Sensor, Probe Material
- Sensor Insulation: Virgin PEEK, FDA Conform
Sensor, Probe Style
- Insertion
Switch Type
- Output Typical: PNP or NPN
Tri-Clamp Connection
- 1-1/2” Tri-Clamp (DN 40) DIN 32676, 38 mm ISO 2852
- 2” Tri-Clamp (DN 50) DIN 32676, 51 mm ISO 2852
Turn-On Time
- Power-Up Time: < 2 seconds
