Images are representations only.
Meter, Turbine, 4 Inch, Guardsman™ LSJ-H, Model K2GE and LSJ-V Model K2SE Series - Spare Parts
Description
The Smith Meter® Guardsman™ Series Turbine Meter is a bladed, rotor-type meter which utilizes an upstream, cantilevered stator to support the tungsten carbide, bearing-mounted rotor.
It is intended for a wide range of petroleum, petrochemical, and chemical custody transfer measurement applications, such as small product pipelines ranging from Natural Gas Liquids (NGL) to light fuel oils.
Smith Meter Guardsman Series L Models are rimless-type rotor turbine meters that use an upstream stator to support the rotor.
They are intended for use at loading racks to provide the highly accurate measurement required for custody transfer of petroleum liquids.
Note: Different features and requirements are available based on where a unit is manufactured.
Throughout this document, manufacturing locations are denoted in parentheses after a feature.
You must place your order with the noted location to receive a unit with the specific feature.
Features- 1.5" to 4" Guardsman™ (G) Series
- Stainless Steel measuring chamber and internals
- Locking stator prevents wear and improves performance
- Tungsten carbide bearings system provides longlife on low lubricating fluids
- Hydrodynamic thrust balance to minimize friction and wear on thrust bearings which allows for long service life and high accuracy
- 125-250 AARH flange face finish
- 1" to 4" Guardsman™ Series Loading Rack (L) Models Turbine Meters
- Stainless-steel measuring chamber and internals
- Locking stator prevents wear and improves performance
- Stainless Steel ball bearings (LB models) and tungsten carbide journal bearings (LJ and LSJ models) provide long life on low lubricating fluids
- Integral-strate-plate flow conditioner (LSJ models)
- Horizontal or vertical installation
- Turbine Meter Diagnostics when used with AccuLoad III
Inventory
Displaying price & availability for Ohio, United States in USD Change Location
46 models matching criteria
Nut, #10-32 - Item 14
In Stock
$1.00 USD
Pin, Dowel, ⅛ x ⅜" - Item 24
In Stock
$2.00 USD
O-Ring (Carbon Steel Housings only) - Item 16 show more
- Note 3: O-Ring not required with Stainless Steel housing
In Stock
$3.00 USD
Screw, Set, #6-32 X ¼" - Item 11
In Stock
$5.00 USD
Clip, Retaining - Item 5
In Stock
$6.00 USD
Screw: After October, 2002 #10-32 x ½" - Item 31
In Stock
$11.00 USD
Washer, Inverted (ATEX version only) - Item 27
In Stock
$13.00 USD
Wire, Ground (UL/CSA version only) - Item 29
In Stock
$16.00 USD
Label: UL/CSA Approvals - Item 12
In Stock
$23.00 USD
Connector, (1-5) - Item 2
In Stock
$27.00 USD
Connector, (6-10) - Item 3
In Stock
$27.00 USD
Screw, Set, #10-32 - Item 25 show more
- Note 2: Apply a small amount of Loctite (Part No. 643917-401) to set screw before installing
In Stock
$27.00 USD
Ring, Retaining (After October, 2002) - Item 32
In Stock
$29.00 USD
Stud (ATEX version only) - Item 26
In Stock
$72.00 USD
Cover, Conduit Box: UL/CSA Approvals - Item 10
In Stock
$110.00 USD
Cone, Upstream: Horizontal - Item 8
In Stock
$114.00 USD
In Stock
$116.00 USD
Cover, Conduit Box: ATEX – Manufactured in USA - Item 10
In Stock
$141.00 USD
Cone, Downstream: Horizontal - Item 7
In Stock
$173.00 USD
Cone, Downstream: Vertical - Item 7
In Stock
$255.00 USD
Cone, Upstream: Vertical - Item 8
In Stock
$255.00 USD
In Stock
$275.00 USD
Box, Conduit - Item 4
In Stock
$294.00 USD
Plate, Compact Flow Conditioner: After October, 2002 - Item 17 show more
- Recommended Stock
In Stock
$311.00 USD
In Stock
$316.00 USD
Coil, Pickup: Mating Connector with Leads (High Temperature Version) - Item 6 show more
- Recommended Stock
In Stock
$320.00 USD
In Stock
$349.00 USD
In Stock
$444.00 USD
Rotor Bearing - Item 19
In Stock
$448.00 USD
Coil, Pickup: -100°F to 400°F (High Temperature Version) - Item 6 show more
- Recommended Stock
In Stock
$746.00 USD
Stator Assembly, Locking - Item 23
In Stock
$1,420.00 USD
Rotor Assembly, Horizontal & Vertical - Item 18
In Stock
$3,275.00 USD
Washer, ¼" Lock (ATEX version only) - Item 28
In Stock
Cover, Conduit Box: ATEX – Manufactured in Germany - Item 10
In Stock
Label: ATEX – Manufactured in USA - Item 12
In Stock
Label: ATEX – Manufactured in Germany - Item 12
In Stock
Plate, Compact Flow Conditioner: Prior to October, 2002 - Item 17 show more
- Recommended Stock
In Stock
Internal Parts Kit - Unidirectional - Horizontal
In Stock
Internal Parts Kit - Unidirectional - Vertical
In Stock
Screw: Prior to October, 2002 #10-32 x ½" - Item 31
In Stock
Specifications
Specifications
Brand
Repeatability
- ± 0.02 % over the normal flow range
End Connections
- Class 150 and 300 American Society of Mechanical Engineers (ASME) B16.5, 125-250 Arithmetic Average Roughness Height (AARH) finish raised-face (RF) flanges
- Class 150, 300, 600, 900 ASME B16.5, 125-250 AARH finish raised face (RF) flanges
- PN 16, 25 and 40 DIN 2526 Form C flange
- PN 63 and 100 DIN 2526 Form E flanges
