Images are representations only.
Description
The Chemtec MiniBLOCK provides users with a complete stainless steel fluid metering block for injecting a wide variety of additives or dyes.
The MiniBLOCK is a patented design and known as an industry standard for fluid injection.
It can be supplied as a "loose" injector and seamlessly integrated with existing terminal automation preset, or pair it with our ProPAC to enable smart functionality depending on your application.
The MiniBLOCK is built on pd meter technology that allows for precision controlled injections in a space efficient design inclusive of a quick disconnect calibration port.
The block also contains an inline strainer and isolation valves reducing downtime for maintenance and increasing injector life.
An integrated check valve prevents any backflow of fluid into the meter. This tried and true injector holds up to its reputation.
MiniBLOCK serves as a ”secondary device” to a user-supplied “Primary controller”.
The product is accurate, reliable and compatible with a wide range of chemicals. The oval gear design offers high accuracy and low pressure drop.
Features- Compact, Stainless Steel block design
- 0.50% accuracy / 0.25% repeatability
- Two flow meter sizes available
- For use in Hazardous Locations
- Available unmounted or 1-PAC through 6-PAC configuration
- Optional thermal relief kit and calibration kit available
Inventory
Displaying prices & availability for Ohio, United States in USD. Change location.
Models matching criteria: 24
Pick Up Sensor for MiniBLOCK 7738 or 7718 Injector
Out of Stock
MiniBLOCK 7738 SS Gear Set: .3 –3.0 GPM
Out of Stock
MiniBLOCK 7738 SS Pin Set - 2
Out of Stock
MiniBLOCK 7718 SS Gear Set: .03-3 GPM
Out of Stock
MiniBLOCK 7718 SS Pin Set - 2
Out of Stock
MiniBLOCK 7738 Teflon Meter Cover "O" Ring
Out of Stock
MiniBLOCK 7718 Teflon Meter Cover "O" Ring
Out of Stock
MiniBLOCK 7718 or 7738 Check Valve
Out of Stock
MiniBLOCK Test Port with Chemraz
Out of Stock
MiniBLOCK 230 Micron Strainer
Out of Stock
MiniBLOCK Inlet / Outlet Needle Valve
Out of Stock
MiniBLOCK Needle Valve O Ring
Out of Stock
MiniBLOCK Strainer Cover O Ring
Out of Stock
MiniBLOCK Hex Head Strainer Cap
Out of Stock
MiniBLOCK 7718 or 7738 Meter Cover Plate
Out of Stock
MiniBLOCK Complete Solenoid, 120 VAC, 17 Watt Coil, Chemraz Seat
Out of Stock
MiniBLOCK Complete Solenoid, 240 VAC, 17 Watt Coil, Chemraz Seat
Out of Stock
Blocking Solenoid - 120V – EFX8262H220-26833-120/60 – 110/50 with ChemrazSeat
Out of Stock
Blocking Solenoid – 220V – EFX8262H220-26833-240/60 - 220/50 with Chemraz Seat
Out of Stock
Blocking Solenoid – 24VDC – EFHTX8262H220-26892 - 24VDC with Chemraz Seat
Out of Stock
Out of Stock
Out of Stock
Standard Injection Point Kit view more
- Standard Injection Point Kit With:
- Check Valve
- Swagelok Fittings
- Stainless Steel
- 2000 # Ball Valve
- Double Tapped Bushing
Out of Stock
Dye Injection Point Kits view more
- Dye Injection Point Kit Installation Kit with Chemraz Blocking Solenoid Valve and Chemraz Check Valve Includes:
- Swagelok Fittings
- Stainless Steel 2000# Ball Valve
- Double Tapped Bushing
Out of Stock
Configure
Specifications
Specifications
Electrical
- Solenoid: ASCO, explosion-proof, 2-Way, direct acting, normally closed, 120 Vac/60 Hz. (Standard), other voltages available as an option. Current 17.1 watt (Standard)
- Sensor: Hall-Effect type, non-intrusive, 3-wire, 5-30 Vdc
Mechanical
- Elastomers: Chemraz dynamic seals, Teflon Viton static seals (Standard), other elastomers available as an option
- Field Mounting: (2) mounting holes provide for the mounting of the device to backplane or unistrut utilizing 5/16-inch hex socket cap screw
- Configuration: Multi-PAC configurations include 1-PAC through 6-PAC, each PAC pre-wired and pre mounted
- Meter Access: Meter access via recessed socket cap screws located under sensor
- Meter Gears: Oval gear design, 300 Series Stainless Steel (Standard) with Tungsten bearing
- Needle Valves: 316 Stainless Steel with Teflon packing, high pressure rated
- Calibration: Swagelok quick-connect fitting with dust cap, 316 Stainless Steel, mates with PN 77-CTK-50 elastomer
- Strainer: Stainless Steel filter screen, basket type, 230 micron (60 mesh) or 440 micron available
- Check Valve: Teflon check with Vitron or Chemraz O-ring, 1 psig cracking check
- Dimensions: 6.5" L x 4" H x 1.5" D (165.1 mm x 101.6 mm x 38.1 mm)
- Connections: 3/8" FNPT Inlet & 3/8" MNPT Outlet
Optional Accessories
- Calibration Kit: PN 77-CTK-50 (Standard)
- Thermal Relief Kit: PN 77-TRK-10 (Device recommended for all dye applications)
