Images are representations only.

BR/TS-80-IIB-P1.6 Detonation Flame Arrester

Brand: PROTEGO
Request Information
The Protego BR/TS-80-IIB-P1.6 detonation flame arrester was developed for protecting tankships but can also be used for containers. 

These devices are especially used on tank ships operating on inland waterways or coastal shipping. 

The device is installed on the tank or a pipe section connected to the tank with a nominal size of 250 mm / 10" and connected to the vapor balancing line (DN80 / 3"). 

The individual tanks connected via the vapor balancing line are technically decoupled by the detonation arresters and protected.
Features
  • Meets all ADN requirements
  • Flat design
  • The emergency venting with the flexibly mounted flame arrester enables use even in bad weather conditions as well as with contaminated products
  • Extraordinarily easy to service
  • The design of the PROTEGO flame arrester unit enables individual FLAMEFILTER discs to be replaced
  • Applicable for nearly all flammable liquids
  • May be used as maintenance and cleaning hatch
  • European agreement concerning the international carriage of dangerous goods by Inland waterways
The Protego BR/TS-80-IIB-P1.6 detonation flame arrester was developed for protecting tankships but can also be used for containers. 

These devices are especially used on tank ships operating on inland waterways or coastal shipping. 

The device is installed on the tank or a pipe section connected to the tank with a nominal size of 250 mm / 10" and connected to the vapor balancing line (DN80 / 3"). 

The individual tanks connected via the vapor balancing line are technically decoupled by the detonation arresters and protected.
Features
  • Meets all ADN requirements
  • Flat design
  • The emergency venting with the flexibly mounted flame arrester enables use even in bad weather conditions as well as with contaminated products
  • Extraordinarily easy to service
  • The design of the PROTEGO flame arrester unit enables individual FLAMEFILTER discs to be replaced
  • Applicable for nearly all flammable liquids
  • May be used as maintenance and cleaning hatch
  • European agreement concerning the international carriage of dangerous goods by Inland waterways
Close

Specifications

Brand

Approvals & Certifications

  • EN ISO 16852, 6358
  • TÜV (Technischer Uberwachungsverein)

Approvals & Certifications

  • NEC Group D to B MESG ≥ 0.5 mm

Cover Material

  • Stainless Steel
  • Steel

Enclosure, Body Material

  • Stainless Steel
  • Steel

Flange Size - 3” (DN 80)

  • 3” (DN 80) - 150# ASME B16.5

Flange Type

  • Raised Face (RF)
  • Smooth Finish

Gasket Material

  • Tankatite

Materials of Construction

  • Flamefilter, Spacer: Stainless Steel

Operating Pressure

  • psi: 0 to 23.2 (kPa: 0 to 160, bar: 0 to 1.6)

Operating Temperature

  • 0° to 60° C (32° to 140° F)

Pressure Type

  • Absolute
Close