Images are representations only.

VESX45/PGS Personnel Grounding Strap

Brand: Newson Gale
Request Information

The operating requirements of certain processes can cause the loss of direct contact between the operator’s static dissipative safety shoes and the static dissipative flooring of the plant or facility.

For example, an operator may need to stand on a ladder to tip powder into a large mixer and in the process of moving to the ladder loses contact with the static dissipative flooring of the plant.

Under limited and controlled circumstances personnel grounding straps may be used.

It should be noted that grounding straps are not a substitute for static dissipative flooring or static dissipative footwear.

Grounding straps should only be used for rare occasions where process operators may lose contact between the soles of their static dissipative footwear and the plant floor.

Features
  • Spiral cable with quick release
  • Mounted safety resistor
  • Adjustable anti-allergy wrist strap

The operating requirements of certain processes can cause the loss of direct contact between the operator’s static dissipative safety shoes and the static dissipative flooring of the plant or facility.

For example, an operator may need to stand on a ladder to tip powder into a large mixer and in the process of moving to the ladder loses contact with the static dissipative flooring of the plant.

Under limited and controlled circumstances personnel grounding straps may be used.

It should be noted that grounding straps are not a substitute for static dissipative flooring or static dissipative footwear.

Grounding straps should only be used for rare occasions where process operators may lose contact between the soles of their static dissipative footwear and the plant floor.

Features
  • Spiral cable with quick release
  • Mounted safety resistor
  • Adjustable anti-allergy wrist strap
Close

Specifications

Brand

Clamp Details

  • ATEX / FM / IECEx approved medium duty static grounding clamp

Material

  • Stainless handles (SS grade: 304) and spring (SS grade: 302)
  • Tungsten carbide teeth for maximum penetration

Dimensions

  • L x W: 4.7” x 1.0” (120 mm x 25 mm)

Clamp Jaw Opening

  • 0.6” (15 mm) maximum

Wrist Strap

  • Anti-allergy adjustable strap

Electrical Safety Resistor

  • 1 Meg-Ohm resistor mounted in the conductor

Cable Details

  • 12 ft (3.7 m) single pole spiral conductor fitted to a quick release connector

Approvals & Certifications

  • FM Certificate of Compliance number: 3046346
  • ATEX: II 1 GD T6 (Assessed to EN 13463-1 : 2009), ATEX certificate number: Sira 02ATEX9381
  • IECEx Ex h IIC T6 Ga, Ex h IIIC T85°C Da, Ta = -40°C to +60°C, IECEx EXV 20.0033
Close