Images are representations only.

Rotork IW-AWWA Range - Quarter-Turn Worm Gear Operators

Brand: Rotork PLC
Request Information
The IW AWWA worm gear operators are suitable for manual actuation of AWWA C504 butterfly and C517 plug valves.

The range has been designed and comprehensively tested to meet or exceed all aspects of the AWWA C504 & C517 specifications, and are manufactured from high quality and reliable materials. 

The range includes a gear design for inherent self-locking capability.
Features
  • Torque range up to 164,000 Nm (120,960 lbf.ft)
  • Ratios from 48:1 to 2374:1
  • 90% grease filled for life and fully sealed
  • Self-lubricated drive sleeve
  • -40° to +120° C (-40° to 250º F) standard temperature range
  • Maximum rated output torque - 1.45 million in-lbs
  • Maximum stem acceptance diameter - 12" bored with ANSI B17.1 square key
  • Above or buried service
  • IP68
  • Options:
    • Stem extensions
    • Padlock kit
    • NAMUR and Westlock position indicator mounting kit
    • High and low temperatures
    • 2" square nut
    • 450 lbf.ft service
    • Mitre box - IB2 for FA10 mounting or IB4 for F14 mounting
The IW AWWA worm gear operators are suitable for manual actuation of AWWA C504 butterfly and C517 plug valves.

The range has been designed and comprehensively tested to meet or exceed all aspects of the AWWA C504 & C517 specifications, and are manufactured from high quality and reliable materials. 

The range includes a gear design for inherent self-locking capability.
Features
  • Torque range up to 164,000 Nm (120,960 lbf.ft)
  • Ratios from 48:1 to 2374:1
  • 90% grease filled for life and fully sealed
  • Self-lubricated drive sleeve
  • -40° to +120° C (-40° to 250º F) standard temperature range
  • Maximum rated output torque - 1.45 million in-lbs
  • Maximum stem acceptance diameter - 12" bored with ANSI B17.1 square key
  • Above or buried service
  • IP68
  • Options:
    • Stem extensions
    • Padlock kit
    • NAMUR and Westlock position indicator mounting kit
    • High and low temperatures
    • 2" square nut
    • 450 lbf.ft service
    • Mitre box - IB2 for FA10 mounting or IB4 for F14 mounting
Close

Specifications

Brand

Operating Temperature

  • -40° to +120° C (-40° to 250° F)

Environmental Protection

  • IP68

Material of Construction

  • 316 Stainless Steel - Fasteners
  • Cast Iron - Baseplate
  • Ductile Iron - Quadrant
  • Steel - Drive Sleeve & Bearings
  • Steel - Position Indicator

Seal Material

  • Nitrile O-Ring

Shaft Material

  • Input Shaft: 431 Stainless Steel
  • Worm Shaft: Steel

Case Material

  • Ductile Iron
Close