Images are representations only.

UB/SF-IIA1 Pressure or Vacuum Diaphragm Valve

Brand: PROTEGO
The deflagration-and endurance burning-proof Protego UB/SF-IIA1 type diaphragm valve is a state of the art pressure-and vacuum-relief valve combining the function of a dynamic flame arrester. 

It is primarily used within biogas plants as a safety device for flame transmission proof in-and outbreathing on tanks, containers and process engineering apparatus. 

The valve offers reliable protection against excess pressure and vacuum, prevents the inbreathing of air and product losses almost up to the set pressure and protects against atmospheric deflagration and endurance burning if stabilized burning occurs. 

The set pressure is adjusted with a freeze resistant water glycol mixture, which assures safe operation under extreme cold weather conditions. 

The liquid is capsuled and is not discharged or diluted during operation. 

The valve can also be operated at temperatures lower than 0° C (32° F) without ice constricting the function of the valve.
Features
  • High performance seal reducing product loss below EPA's 500 ppm rule preventing environmental pollution
  • Set pressure close to opening pressure enables optimum pressure maintenance in the system
  • Can be used as a protective system according to ATEX directive in areas subject to an explosion hazard
  • Protection against atmospheric deflagrations and endurance burning for products up to explosion group IIA1
  • Flame-transmission-proof venting of the pressure chamber
  • Freeze protection at sub-zero conditions
  • Self draining function for condensate
  • Liquid column height is monitored by level indicators
  • Easy maintenance through hinged vent cap
  • The modular design enables individual diaphragm to be replaced
  • Can be applied in biogas plants due to internal coating
  • Permanent refilling of the frost-proof liquid is not necessary, liquid remains within the valve chambers
  • Spray nozzle for internal cleaning and avoidance of foam upon request
The deflagration-and endurance burning-proof Protego UB/SF-IIA1 type diaphragm valve is a state of the art pressure-and vacuum-relief valve combining the function of a dynamic flame arrester. 

It is primarily used within biogas plants as a safety device for flame transmission proof in-and outbreathing on tanks, containers and process engineering apparatus. 

The valve offers reliable protection against excess pressure and vacuum, prevents the inbreathing of air and product losses almost up to the set pressure and protects against atmospheric deflagration and endurance burning if stabilized burning occurs. 

The set pressure is adjusted with a freeze resistant water glycol mixture, which assures safe operation under extreme cold weather conditions. 

The liquid is capsuled and is not discharged or diluted during operation. 

The valve can also be operated at temperatures lower than 0° C (32° F) without ice constricting the function of the valve.
Features
  • High performance seal reducing product loss below EPA's 500 ppm rule preventing environmental pollution
  • Set pressure close to opening pressure enables optimum pressure maintenance in the system
  • Can be used as a protective system according to ATEX directive in areas subject to an explosion hazard
  • Protection against atmospheric deflagrations and endurance burning for products up to explosion group IIA1
  • Flame-transmission-proof venting of the pressure chamber
  • Freeze protection at sub-zero conditions
  • Self draining function for condensate
  • Liquid column height is monitored by level indicators
  • Easy maintenance through hinged vent cap
  • The modular design enables individual diaphragm to be replaced
  • Can be applied in biogas plants due to internal coating
  • Permanent refilling of the frost-proof liquid is not necessary, liquid remains within the valve chambers
  • Spray nozzle for internal cleaning and avoidance of foam upon request
Models matching criteria: 2
  • Model - Pressure/Vacuum Diaphragm Valve, Basic Design
Out of Stock
  • Model - Pressure/Vacuum Diaphragm Valve with Heating Coil
Out of Stock

Specifications

Brand

Approvals & Certifications

  • ATEX
  • CEN
  • IEC

Approvals & Certifications

  • EN 14015, EN 16852
  • ISO 6358, ISO 16016
  • TÜV (Technischer Uberwachungsverein)

Diaphragm Material

  • FPM

Enclosure Finish

  • Polymer Coating

Enclosure, Body Material

  • Steel

Environmental Protection

  • Explosion-proof Group IIA1

Flange Size - 3” (DN 80)

  • 3” (DN 80) - 150# ASME B16.5

Flange Size - 4” (DN 100)

  • 4” (DN 100) - 150# ASME B16.5

Flange Size - 6” (DN 150)

  • 6” (DN 150) - 150# ASME B16.5

Flange Type

  • Raised Face (RF)
  • Smooth Finish

Gasket Material

  • FPM

Materials of Construction

  • Valve Top, Heating Coil: Stainless Steel

Operating Temperature

  • 0° to 60° C (32° to 140° F)

Pressure Range

  • psi: 0.050 to 2.176 (kPa: 0.35 to 15, Mbar, 3.5 to 150)
  • psi: -0.507 to -0.050 (kPa: -3.5 to -0.35, Mbar: -35 to -3.5) - Vacuum

Process Temperature

  • Maximum

Seat / Seal Material

  • Valve Seat: Stainless Steel