Images are representations only.

Pin, Groove, 1.08" x 0.63" - Item 79

Price
Request a Quote
Stock
In Stock

Specifications

Maximum Flow Rate

  • Continuous Rating with Standard Trim: 420 USGPM (1600 L/min)
  • Intermittent Rating with Standard Trim: 500 USGPM (1900 L/min)
  • Continuous/Intermittent Rating with all Iron or LPG Trim: 315 USGPM (1200 L/min)

Repeatability

  • ± 0.02 %

Viscosity

  • Standard: 400 mPa.s (2,000 Seconds Saybolt Universal (SSU)) maximum
  • Optional: 2 pascal seconds (Pa.s) (10,000 SSU) maximum and specify “High Viscosity Meter Clearances”
  • Over 2 Pa.s: Specify ”High Viscosity Meter Clearances” and derate maximum flow rate in direct proportion to viscosity over 2 Pa.s. For example, at 4 Pa.s, derate maximum flow rate to 50 % of normal continuous rating 210 USGPM

Temperature - Standard Meter Clearances with

  • Buna-N/PTFE: -20° F to 150° F (-29° C to 65° C)
  • FKM: 10° F to 150° F (-12° C to 65° C)
  • Low Temperature FKM: -50° F to 150° F (-46° C to 65° C)

Temperature - High Temperature Meter Clearances with

  • Buna-N/PTFE: -20° F to 200° F (-29° C to 93° C)
  • FKM: 10° F to 200° F (-12° C to 93° C)
  • Low Temperature FKM: -50° F to 200° F (-46° C to 93° C)

Temperature - All Iron Trim with

  • Buna-N: -20° F to 225° F (-29° C to 108° C)
  • PTFE: -20° F to 400° F (-29° C to 205° C)
  • FKM: 10° F to 400° F (-12° C to 205° C)
  • Low Temperature FKM: -50° F to 400° F (-46° C to 205° C)