Images are representations only.

LT9000 Radar Level Transmitter

Brand: Babbitt International Inc
Request Information
The LT9000 level transmitter utilizes Radio Frequency admittance technology, which measures the change in capacitance between the sensor probe and the vessel wall in order to determine the level. Any change in level causes a capacitance change, which is converted into a 4/20 mA output signal. This signal can then be sent to a local display, PLC or other programable controller.

The standard unit is made of a solid stainless-steel probe fully insulated with a non-conductive coating such as HALAR or thick TEFLON SLEEVE – both compatible with a wide variety of aggressive liquids. 

Inside the explosion proof housing are the sensing electronics and manual calibration adjustment. The isolated 4-20 mA output signal can drive a load of up to 1000 ohms. The zero and span can be set over the entire length of the probe or any portion of the probe. 

The entire unit is backed by a two-year warranty, 60-day money back guarantee.
Features
  • 4-20 mA output
  • Fully isolated output
  • No moving parts
  • Simple installation and calibration
  • Explosion proof housing standard
  • On board fuse protection
  • Modular electronics easily replaced
  • Temperature stable electronics
The LT9000 level transmitter utilizes Radio Frequency admittance technology, which measures the change in capacitance between the sensor probe and the vessel wall in order to determine the level. Any change in level causes a capacitance change, which is converted into a 4/20 mA output signal. This signal can then be sent to a local display, PLC or other programable controller.

The standard unit is made of a solid stainless-steel probe fully insulated with a non-conductive coating such as HALAR or thick TEFLON SLEEVE – both compatible with a wide variety of aggressive liquids. 

Inside the explosion proof housing are the sensing electronics and manual calibration adjustment. The isolated 4-20 mA output signal can drive a load of up to 1000 ohms. The zero and span can be set over the entire length of the probe or any portion of the probe. 

The entire unit is backed by a two-year warranty, 60-day money back guarantee.
Features
  • 4-20 mA output
  • Fully isolated output
  • No moving parts
  • Simple installation and calibration
  • Explosion proof housing standard
  • On board fuse protection
  • Modular electronics easily replaced
  • Temperature stable electronics
Close
Close

Specifications

Brand

Power

  • 115 Vac (± 15 %) 50/60 Hz
  • 24 Vdc

Output

  • 4-20 mA

On Board Fuse

  • 0.5 A @ 125 V

Frequency

  • 10,000 to 300,000 Hz

Temperature Range

  • Probe: -30° to 340° F - HALAR
  • -30° to 250° F - Teflon Sleeve

Pressure

  • Standard: 1,500 psi @ 75° F - 1” NPT
  • 300 psi @ 75° F - 3/4” NPT Optional

Enclosure

  • Cast Aluminum, Explosion Proof - Class I, Groups C & D; Class II, Groups E, F & G

Probe Material

  • 316 Stainless Steel
  • Viton
  • Teflon
Close

Applications

  • Continuous Level Transmission of Non-coating, Conductive Fluids
Liquids
  • Water
  • Acids
  • Wastewater
Close