Images are representations only.

Meter, Turbine, 1½ Inch Guardsman™ GL Series Model K2CA - Spare Parts

Brand: TechnipFMC
The Smith Meter® Guardsman™ Series Turbine Meter is a bladed, rotor-type meter which utilizes an upstream, cantilevered stator to support the tungsten carbide, bearing-mounted rotor.

It is intended for a wide range of petroleum, petrochemical, and chemical custody transfer measurement applications, such as small product pipelines ranging from Natural Gas Liquids (NGL) to light fuel oils.

Smith Meter Guardsman Series L Models are rimless-type rotor turbine meters that use an upstream stator to support the rotor.

They are intended for use at loading racks to provide the highly accurate measurement required for custody transfer of petroleum liquids.

Note: Different features and requirements are available based on where a unit is manufactured.

Throughout this document, manufacturing locations are denoted in parentheses after a feature.

You must place your order with the noted location to receive a unit with the specific feature.
Features
  • 1.5" to 4" Guardsman™ (G) Series
    • Stainless Steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Tungsten carbide bearings system provides longlife on low lubricating fluids
    • Hydrodynamic thrust balance to minimize friction and wear on thrust bearings which allows for long service life and high accuracy
    • 125-250 AARH flange face finish
  • 1" to 4" Guardsman™ Series Loading Rack (L) Models Turbine Meters
    • Stainless-steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Stainless Steel ball bearings (LB models) and tungsten carbide journal bearings (LJ and LSJ models) provide long life on low lubricating fluids
    • Integral-strate-plate flow conditioner (LSJ models)
    • Horizontal or vertical installation
    • Turbine Meter Diagnostics when used with AccuLoad III
The Smith Meter® Guardsman™ Series Turbine Meter is a bladed, rotor-type meter which utilizes an upstream, cantilevered stator to support the tungsten carbide, bearing-mounted rotor.

It is intended for a wide range of petroleum, petrochemical, and chemical custody transfer measurement applications, such as small product pipelines ranging from Natural Gas Liquids (NGL) to light fuel oils.

Smith Meter Guardsman Series L Models are rimless-type rotor turbine meters that use an upstream stator to support the rotor.

They are intended for use at loading racks to provide the highly accurate measurement required for custody transfer of petroleum liquids.

Note: Different features and requirements are available based on where a unit is manufactured.

Throughout this document, manufacturing locations are denoted in parentheses after a feature.

You must place your order with the noted location to receive a unit with the specific feature.
Features
  • 1.5" to 4" Guardsman™ (G) Series
    • Stainless Steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Tungsten carbide bearings system provides longlife on low lubricating fluids
    • Hydrodynamic thrust balance to minimize friction and wear on thrust bearings which allows for long service life and high accuracy
    • 125-250 AARH flange face finish
  • 1" to 4" Guardsman™ Series Loading Rack (L) Models Turbine Meters
    • Stainless-steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Stainless Steel ball bearings (LB models) and tungsten carbide journal bearings (LJ and LSJ models) provide long life on low lubricating fluids
    • Integral-strate-plate flow conditioner (LSJ models)
    • Horizontal or vertical installation
    • Turbine Meter Diagnostics when used with AccuLoad III
Close

Displaying prices & availability for Ohio, United States in USD. Change location.

Models matching criteria: 38
643747-405
Nut, #2-56, Hex - Item 15 view more
  • Recommended Stock
In Stock
$1.00 USD
641069-474
O-Ring (Carbon Steel Housing Only) - Item 16
In Stock
$3.00 USD
645416-402
Screw, #8-32 x 3/16" Set - Item 24 view more
  • Note 4: Apply a small amount of Loctite (Part No. 643917-401) to set screw before installing
In Stock
$3.00 USD
646655-401
Coil, Pickup: -100°F to +225°F - Item 7 view more
  • Recommended Stock
In Stock
$4.00 USD
643243-403
Screw, Set, #6-32 x ¼" - Item 11
In Stock
$5.00 USD
543192-203
Clip, Retaining - Item 6
In Stock
$6.00 USD
644541-402
Pin, Dowel, ⅛" x 3/16" - Item 23
In Stock
$12.00 USD
550770-001
Washer, Inverted (ATEX version only) - Item 27
In Stock
$13.00 USD
644420-404
Ring, Retaining - Item 18 view more
  • Recommended Stock
In Stock
$16.00 USD
544058-101
Wire, Ground (UL/CSA version only) - Item 29
In Stock
$16.00 USD
543195-200
Label: UL/CSA - Item 12
In Stock
$23.00 USD
645030-452
Connector, (1-5) - Item 2
In Stock
$27.00 USD
645030-453
Connector, (6-10) - Item 3
In Stock
$27.00 USD
550773-001
Stud (ATEX version only) - Item 26
In Stock
$72.00 USD
543196-100
Cover, Conduit Box: UL/CSA - Item 10
In Stock
$110.00 USD
544057-101
Cover, Conduit Box: ATEX – Manufactured in USA - Item 10
In Stock
$141.00 USD
644532-406
Bearing, Ball - Item 4 view more
  • Recommended Stock
In Stock
$193.00 USD
543256-200
Box, Conduit - Item 5
In Stock
$294.00 USD
006110-002
Screw, #10-32 x ¼" (UL/CSA version only) - Item 30
In Stock
006621-001
Washer, ¼" Lock (ATEX version only) - Item 28
In Stock
060060-001
Nut, ¼"-20 (ATEX version only) - Item 25
In Stock
009544-401
Screw, #10-32 x ¼" - Item 20
In Stock
013403-200
Gasket, Cover - Item 13
In Stock
230663-101
Preamplifier: PA-6, 12 to 24 VDC - Item 1 view more
  • Recommended Stock
In Stock
544686-201
Cone, Downstream - Item 8
In Stock
544685-203
Cone, Upstream - Item 9
In Stock
544057-102
Cover, Conduit Box: ATEX – Manufactured in Germany - Item 10
In Stock
544056-201
Label: ATEX – Manufactured in USA - Item 12
In Stock
544056-202
Label: ATEX – Manufactured in Germany - Item 12
In Stock
643164-413
Washer, Lock #2 - Item 17 view more
  • Recommended Stock
In Stock
544699-191
Rotor Assembly: Standard - Item 19 view more
  • Recommended Stock
  • Note 2: Due to change in the design of this meter in August of 1987, it is necessary to determine whether your meter is of current or previous design. Standard serial numbers up to and including 5015, and special serial numbers up to and including 200779 are considered previous design. Numbers higher than those are current design. These numbers can be found on the nameplate of the meter and on the stator.
In Stock
544216-201
Key, Hex, Modified - Item 21 view more
  • Recommended Stock
In Stock
544690-101
Stator Assembly - Item 22 view more
  • Note 3: If problems are encountered during installation of stator, please contact the Factory, (814) 898-5000
In Stock
544699-101
Internal Parts Kit - Unidirectional (Standard Linearity)
In Stock
544699-201
Internal Parts Kit - Unidirectional (Premium Linearity)
In Stock
Consult Factory
Coil, Pickup: Mating Connector with Leads (High Temperature Version) - Item 7 view more
Note 4: Apply a small amount of Loctite (Part No. 643917-401) to set screw before installing
Out of Stock
Consult Factory
Coil, Pickup: Mating Connector with Leads (High Temperature Version) - Item 7
Out of Stock
Consult Factory - See Note 1
Housing - Item 14 view more
Note 1: Consult Factory, (814) 898-5000, provide model no. and serial no. and advise:
  • Uni or Bidirectional
  • Housing Material
  • Flange Material
  • Flange Class (Pressure)
  • Number of Pickup Coil Bosses
  • Type of Flange
Out of Stock
Close

Specifications

Brand

Repeatability

  • ± 0.02 % over the normal flow range

End Connections

  • Class 150 and 300 American Society of Mechanical Engineers (ASME) B16.5, 125-250 Arithmetic Average Roughness Height (AARH) finish raised-face (RF) flanges
  • Class 150, 300, 600, 900 ASME B16.5, 125-250 AARH finish raised face (RF) flanges
  • PN 16, 25 and 40 DIN 2526 Form C flange
  • PN 63 and 100 DIN 2526 Form E flanges
Close